2006 PRODUCT ENGINEERING INTRODUCTION Next   
  
 
 

 


  The name emtek stands for Engineered Mat Technology.

  The basic premise behind the product is to provide a better mat
     through engineering.

  Because of this premise our approach to the market is through
     engineering.

  Engineering drives consistency, reduced weight, flexibility, and
     COST SAVINGS

The values below are the basic design properties that we use to design specific critical applications such as deflection senstive crane picks, clear spans (bridging), and extremely heavy loads over utilities, etc. These properties are also the basis for the loading tables that we have published in our Design Guide at www.anthonycomposites.com.

 

  emtek Design Properites
  }
Fb = 4123 psi
Fv = 379 psi

W/ 1.33 Load Duration Factor
E = 1.6 (10)6 psi

 

Unit Section Properties                                                              
No Size
t x b 		A
ln2		 I
ln4		 S
ln3		 MA
K-Ft		 VA
K
1
3.5" x 12"
42
42.875
24.50
8.418
10.612
2
4.5" x 12"
54
91.125
40.50
13.915
13.644
3
5.5" x 12"
66
166.375
60.50
20.787
16.676
4
6.5" x 12"
78
274.625
84.50
29.032
19.708
5
7.5" x 12"
90
412.875
112.50
38.653
22.740

A = t(b)
I=
bt3
   S=
bt2
MA = FbS
VA =
FVA
~
(
FV lb
)
  
12
6
1.5
Q
  

K = KIP = 1000 lbs
MA = Allowable Moment W/1.33 Load Duration Factor
VA = Allowable Shear W/1.33



   Drill site being prepped with
   emtek mats
 

Mailing:
PO Box 490
Sheridan, AR 72150-0490

Shipping:
606 E. Center Street
Sheridan, AR 72150

Phone 1-870-942-4000
Fax 1-870-942-4040

 

www.anthonycomposites.com